Looking for :
Kongsberg cutting tables in paritcular the XL22
Nexpress equipment needed
For
Sale
3873
2000
L420 Less that 16mm impressions,Baldwin Recirulation system
Console,(on delivery)Semi-Auto Plate Hangers,Spray Unit,19 Press
Carts. This press is super clean and has always been Well Maintained
_____________________________________________________________
Plant 1
2002
Heidelberg QM DI-46-4 with 5M impressions.
2000 Heidelberg PM-46-2 with 14M impressions.
2004 ProSetter 74, IBM with MetaDimension/Prinergy.
2002 Stahl Folder B30/4/4 with trim kit, right angle with continuous
feed.
Plate punch for a Heidelberg SM74 and the PM listed above
_____________________________________________________________________________
3648
1991
Man Roland
Model 608 3B M
Series 652
Sheet size max 28 3/8 X 40
min
11 X 16
7/C
with coater
Mabeg feeder with vacuum side guide and feed tapes.
Doyle Sheet cleaning system
Baldwin fountain chillers
Ternes pre register system
Rolandmatic fountain controllers
Man
Roland E.P.S.
Oxy
Dry model 216 powder sprayer
Dahlgren coater
Dahlgren Aux. dryer
Jac.De.Vries infered dryer
impressions: 101 million
1981
Heidelberg HDFP102 5 color/perfector sn#517xxx
323 mil. imp
28x40 max sheet size
CPC 1 console
Dahlgren dampening system
5 Baldwin water refrigeration units
Spiess feeder
Sheet decurler
Ink agitators
Oxy-Dry powder unit(spare bulbs)
Quick change blanket bars
Chrome back cylinder(1st unit)
5 wash up blades
Rebuilt drive motor 1/11
New feeder air compressor 11/10
3851
1997 Ryobi 662 PFH Perfector - w/ Roll Sheeter, External Water
90 Mil. Impressions
Max. Sheet Size - 20" x 26"(508mm x 660mm)
Roll Sheeter – Max Width- 23” - Gears for 17.5” & 18” Cut Length
Excellent Condition, Very Well-maintained Press, Versatile 3 Color
Press, 2 Over 1 Perfector (without Reversing), Alcolor Dampening,
Stream Feeder, Sheet Decurler, Double Sheet Detectors, & Powder
Spray
-The machine is currently powered and can be seen in operation
Sheeter was made specifically for this machine and will not sell
without
press can be run with cut sheet or rolls.
Include in price is -1990 Nissan Fork Lift w/ Forks & Cascade Roll
Clamp to carry the rolls.
1992 Komori L240 P
Perry Dryer,2 Recirculating Tanks,
80,000 mil impressions
2923
1985 Solna 425
The press is in very good condition, it’s being use d about once a
week. Total imp count is 17082031 ,It has traditional dampening
system. Press has plenty of room on the side to accommodate a fork
lift. Easy out, dock level
1998 Komori L440 P
143,000,000 imp
PQC
Auto blanket washers
Auto paper size
ESS System E500
IVT Combi
NO chillers for fountain or rollers
Up on steel beams
3558
2009 Autofeeds HSTS 3048
standard swiss feeder
used in graphic arts industy
Complete specs:
Autofeeds High Speed Two-Sided Thermal Laminating System
General Features & Benefits
•Manufacturer: Autofeeds
•Complete production line: Universal Sheet Feeder + High Speed
Laminator + High Speed Autotrimmer
•30” web width.
•Fully automatic from sheet feed to finished product.
•Solid cast alloy electrically heated and hard anodized heat rolls.
•Precision electronic temperature control.
•Water cooled 'S' wrap chill roll cooling system. UPGRADE:
refrigeration unit.
•Automatic edge trim waste rewind.
•Maximum line speed capability in excess of 100 ft/minute.
•UPGRADE: Twin film supply rolls (upper and lower).
•UPGRADE: High speed autotrimmer option.
•BONUS: Backup set of silicone rollers included.
•LIKE NEW CONDITION! Barely used; < 600K sheets processed.
WEBS AND MISC
1976 4unit Goss Community press
It has a Community folder It can quarterfold
Printing diameter is 7-1/4"
Web width is 29"-35"
Page cut off is 22-3/4"
Drop fountains
Gremser Folder
Model: Herzog & Heyman
Type : R6
Year : 2004
AGFA 2002 Phoenix 2250 to sell with OLP and inline punching
Need offers
Kodak Epson match print proofer
Need offers
Linotype 330
Need offers
